Updating an old mac

Supported Operating Systems Windows 8 Windows 7 32bit and 64bit. The driver has options to connect to an i Live or GLD on the network.

Please note that Windows PC drivers are currently not available.

And that family is an extended one, with no fewer than 6 Mix Racks and 7 Surfaces to fit a range of roles and budgets, plus an array of software, apps and remote controllers. A&H TCP MIDI Driver Installer The TCP MIDI Driver allows the GLD or i Live MIDI Protocol to be communicated over an Ethernet connection to a computer.

Please note you are advised to download and read the release notes before downloading this firmware or software. By installing the driver, a virtual MIDI port will be available for DAW control or similar applications.

You can restore the previous version V1.54 from this screen.

The older version is bundled as a backup within this V1.7 update.

i Live is a uniquely flexible digital mixing system.

If your system has non standard IP addresses and is currently running 1.43 or lower, there is a small chance that it will not connect.

This does not affect units running 1.5 or later versions. If your system fails to connect to Surface and Mix Rack, press the Touch Screen Network Setup button on-screen then press Reset Network Settings – Apply – OK.

When the system connects, you can set your own IP address again. If your system still fails to connect, carry out these instructions to reset the network address.

Note – i DR-32 and i DR-48 Mix Rack firmware failing to update using i Live Editor We became aware of a manufacturing error which resulted in the incorrect boot code being used within certain IDR32 and i DR48 Mix Racks.

The code that has been used is the same as that used prior to the release of firmware version 1.5 and therefore does not support the use of i Live Editor to update the firmware within the Mix Rack.